ATLLOGO  
20AReceptacleHead
20AReceptacle
Clamp

DESIGN

Special five-leaf clamp design, contact connectors smoothly and with larger area. It can increase efficiency substantially and will not scratch the conductive plating layer of the power connector and not let it loss the accurate and sufficient performance.

ReceptacleClamp U.S.A.TYPE

ETP pure copper, with 100% electricity conductivity.
Special five-leaf clamp design, no scratch on connector conductive plating layer when it plug in and plug out.
EUReceptacleClamp

EU TYPE

Direct wire screwed in design. Make direct contact to the wire clip, to reduce the electical impeding, and the effect of power can be significantly increased and to make the overall sound system in a more perfect state.

ReceptaclePlating ATL CU/AG/AU/RH multi-layer plating is ATL's many years developed plating technic. The arrangement of each layer plating, electroplating composition and plating thickness all contribute different sound characteristics.
CU: strengthen the performance of frequency range, make the ETP material's frequency performance demonstrated more clearly and naturally.
AG: Strengthen the performance of high-frequency range, make the ETP material, CU coating demonstrated a broader frequency.
AU: Soften the full-range frequency, make the ETP material, CU/AG coating exhibited a more mellow sound.
RH: Strengthen the whole range of extremely high frequency, to create the overall sense of space/air by the frequency range, to demonstrate an unprecedented performance.
P.S.: ATL using PURE RH plating, compare to other brands' RH plating claimed, it is more beautiful white and with general sense of a significant difference in dark.
 

ETP COPPER
ATL use custom-made ETP copper, SGS certified 100% conductivity copper material, to produce ATL products power connectors / power receptacles / power inlets, makes these products current / freqency transmission, will not be hindered then lower the quality.

CONDUCTIVITY
ETP copper 100% Brass 25-35% Phosphor bronze 13%